Can the hardness of titanium base steel bonded alloy bar be further improved?

Many customers often talk about whether the hardness of  the titanium base steel bonded alloy bar  can be increased a little, for example, the hardness reaches 80, so that it is more wear-resistant and has a longer life when applied to the high manganese steel hammer head and wear-resistant parts of the crusher. In fact, our formula has been adjusted for many times and tested repeatedly to get the most suitable formula. Once the hardness is improved, the use effect is not ideal.

The hardness of Wansheng alloy titanium base steel-bonded alloy rod can not be higher than HRC65.

For its combination with high manganese steel, it has a feature that under strong impact and extrusion conditions, the surface layer rapidly undergoes work hardening, which makes the hardened layer have good wear resistance while maintaining toughness and plasticity. If the hardness of Ti-based cermet steel-bondedcemented carbide rodis too high, fracture will occur during use, which will affect the use effect. The hardness of Ti-based steel-bonded alloy rod is the most suitable at HRC60, and it can achieve better results when used.